SpecTracker – Full Setup & User Guide

Before You Start

Make sure you have:

  • Your SpecTracker device
  • Charger
  • Silicone attachments (multiple sizes)
  • 3M adhesive strip
  • A smartphone with Bluetooth

1. Charging Your SpecTracker

Before first use, charge your device for at least 1 hour.

Tip: After attaching the tracker to your glasses, you can charge it without removing it from the frame.

How to charge:

  1. Plug the charger into a USB port (wall adapter, computer, or power bank).
  2. Clip the SpecTracker into the charger securely.

LED Indicators:

  • Flashing Red – Charger is connected to power
  • Solid Red – SpecTracker is charging
  • LED Off – Fully charged
Tip: If no light appears, check the USB power source or reposition the device in the charger.

2. Downloading the App

SpecTracker uses a third-party app to function.

Make sure Bluetooth permissions are enabled when installing the app.

3. Pairing Your SpecTracker

  1. Turn on Bluetooth on your phone.
  2. Keep SpecTracker within 1–2 metres of your phone.
  3. Open your phone's Bluetooth settings.
  4. Tap "Pair New Device".
  5. Select "iTrack" from the list.
  6. Once connected, open the app to complete setup.
  7. Allow all necessary permissions when prompted.

4. Attaching SpecTracker to Your Glasses

Step 1: Choose the Right Silicone Attachment

  • Try the different sizes included.
  • Select one that fits snugly on the arm of your glasses.
  • It should feel secure but not overly tight.

Step 2: Fit the Silicone Holder

  • Slide the silicone attachment onto the arm (temple) of your glasses.
  • The fit should be firm and not slide easily.

Step 3: Insert the Tracker

  • Slide the tracker into the silicone holder.
  • Check for comfort.
Tip: Try mounting the tracker on the inside of the arm for a more discreet look.

Step 4: Extra Security with 3M Tape (Optional)

For a more permanent solution, you can use the included 3M adhesive tape (still removable when needed):

  1. Clean the surface of the glasses arm (dry and dust-free).
  2. Remove the protective film from one side of the 3M adhesive strip.
  3. Press it firmly onto the glasses arm.
  4. Remove the protective film from the other side.
  5. Press the tracker firmly onto the 3M tape.
Tip: Hold pressure for 10–15 seconds for best adhesion. Let it sit for a few minutes before use.

Final Check:

  • Gently move the tracker to ensure it doesn't slide.
  • Put your glasses on to confirm comfort.

5. Using SpecTracker

To find your glasses:

  1. Open the iTrack app.
  2. Select your SpecTracker device.
  3. Tap "Ring".
  4. Follow the sound to locate your glasses.
Tip: Extra settings can be found by selecting the device from the list and swiping right.
  • Last Known Location: Tap the location icon in the app.

Troubleshooting

Device not turning on

  • Charge for at least 1 hour
  • Check the charger connection
  • Try a different USB power source

Not appearing in Bluetooth

  • Ensure Bluetooth is turned ON
  • Keep the device close (within 1–2 metres)
  • Turn Bluetooth off and on again
  • Restart your phone

Won't connect or keeps disconnecting

  • Remove "iTrack" from your Bluetooth list
  • Re-pair the device
  • Ensure it's not connected to another phone

No sound when using "Ring"

  • Check the device is connected
  • Ensure the battery is charged
  • Move closer to the device
  • Reconnect if needed

Weak signal / trouble locating

  • Bluetooth range is limited (~10–15 metres indoors)
  • Walls and furniture can reduce signal strength
  • Move around slowly while using the "Ring" feature

Tracker feels loose or moves

  • Try a different silicone size
  • Reapply or use the 3M adhesive
  • Ensure the surface is clean before applying tape

Tips for Best Performance

  • Keep your device charged regularly
  • Ensure it is securely attached
  • Use the app as soon as you misplace your glasses
  • Avoid exposing the device to excessive moisture

Contact us at info@spectracker.com.au if you have any issues.